Home | Kitchen Cleaning | How to Clean Mold From Fridge Gasket

How to Clean Mold From Fridge Gasket

Reviewed by Zac Kieffer

Updated: September 16, 2025

Easily remove mold from your fridge gasket with E-Cloth. Simple, effective steps for a spotless, healthier refrigerator—no harsh chemicals needed.

Title

How to Clean Mold From Fridge Gasket

Tools:

- E-Cloth
- White vinegar
- Spray bottle
- Soft-bristled brush or old toothbrush
- Towel

Prepare Your Space

Remove all food from the fridge to avoid contamination.
Unplug the fridge for safety while cleaning.
Lay down a towel to catch any drips from the cleaning solution.

Create a Cleaning Solution

Mix one part warm water with one part white vinegar in a spray bottle.
Vinegar is a natural mold killer and safe for most surfaces.

Apply the Solution

Spray the vinegar solution generously on the moldy gasket area.
Let it sit for about 10 minutes to break down the mold.

Scrub the Mold

Use a soft-bristled brush or an old toothbrush to gently scrub the gasket.
Focus on crevices where mold tends to hide.
Be gentle to avoid tearing or damaging the gasket.

Wipe and Rinse

Wipe the gasket thoroughly with a clean, damp cloth.
Repeat the spraying and wiping if any mold spots remain.

Dry the Area

Use a dry cloth to remove any remaining moisture.
Leave the fridge door open for a little while to let it air dry completely.

Precautions:

Wear Protective Gear

Ensure you wear gloves and a mask to protect your skin and respiratory system.
Consider goggles if there’s a risk of splashing cleaning solutions.

Ensure Proper Ventilation

Open windows or use a fan to reduce exposure to mold spores and chemical fumes.

Unplug and Empty the Fridge

Disconnect the fridge to eliminate electrical hazard risks.
Remove or cover food items to prevent accidental contamination.

Avoid Mixing Cleaning Chemicals

Do not combine different cleaners, especially bleach and ammonia, to prevent dangerous reactions.

Read and Follow Product Instructions

Review labels on cleaning products and consult your fridge’s manual to avoid damaging the gasket.

Test Cleaning Solutions First

Apply a small amount on an inconspicuous area of the gasket to ensure it won’t cause deterioration.

Dispose of Used Materials Safely

Properly dispose of or clean contaminated cloths and sponges to minimize mold recurrence.

How to Maintain Cleanliness Mold From Fridge Gasket: Extra Tips

Regular Cleaning Routine

Make it a habit to wipe the fridge gasket with a damp cloth every week to prevent mold buildup.
Use a mixture of warm water and a few drops of dish soap for gentle cleaning without harsh chemicals.
Dry the gasket thoroughly with a soft towel after cleaning to eliminate extra moisture.

Title

Keep the Gasket Dry

Ensure the fridge door is fully closed to minimize humidity in the gasket area.
If you notice condensation, wipe it off immediately before it turns into mold.
Check the gasket's seals periodically to make sure there are no foggy or damp spots.

Title

Use Natural Cleaning Solutions

Mix white vinegar with water (1:1 ratio) for an effective mold-busting cleaner that’s safe for food areas.
For a boost, add a sprinkle of baking soda to your vinegar solution to tackle tougher spots.
Apply the solution with a spray bottle, let it sit for a few minutes, then scrub gently with an old toothbrush.

Title

Regular Inspection and Maintenance

Inspect the gasket every few weeks to catch any early signs of mold or wear.
If you see persistent mold growth, consider removing the gasket (if detachable) to clean it thoroughly.
Replace the gasket if it becomes too damaged or hard to maintain properly to ensure optimal fridge performance.

Common Mistakes When Cleaning Mold From Fridge Gasket

Using Harsh Chemicals

Many tend to grab strong cleaners like bleach or ammonia without checking compatibility with gasket materials, which can cause deterioration over time.
Stick to a mild solution of dish soap and warm water, and add a dash of vinegar if needed. Harsh chemicals can harm rubber seals and make the problem worse.

Skipping the Rinse and Dry Steps

After scrubbing away the mold, failing to thoroughly rinse leaves behind chemical residues that encourage new mold growth.
Not drying the gasket properly can also trap moisture, creating an ideal environment for mold to return.

Neglecting Regular Maintenance

Cleaning mold only when it’s visible means you’re always chasing the problem rather than preventing it.
Regularly check and wipe down the gasket, and keep the fridge interior dry to reduce the chances of mold recurrence.

Title

How Often to Clean How to Clean Mold From Fridge Gasket

Frequency Recommendation

Clean your fridge gasket for mold at least once a month to keep any buildup in check.
This monthly schedule helps remove the moisture and food particles that mold loves, reducing the chance of a full-scale mold outbreak.
If you live in a humid environment or notice the gasket feels sticky or has visible patches, consider doing a quick check or spot-clean on a weekly basis.
Regular cleaning not only prevents mold but also extends the life of your gasket and helps your fridge operate more efficiently.

E-Cloth

Other Brands

Precision-engineered, uniform microfibers

Often crushed/less consistent fibers

No streaks with just water

May need chemicals for same results

Lasts ~300 washes

Many break down faster

Traps and locks in particles

Can smear dirt around

Reduces chemicals & waste, reusable

Less eco, more waste/chemicals

Shop Now

A Clean You Can See

Our high-performance microfiber products simplify cleaning, making it quick, easy, and effective, so you can enjoy visible results without the fuss. No streaks, just results.

Shop Now