Pre-treatment & Assessment

• Inspect the Stain: Before diving in, take a close look at how deep and widespread the curry stain is. Marble is porous, so the stain might have seeped beneath the surface.
• Avoid Harsh Chemicals: Do not use acidic or abrasive cleaners (like vinegar or lemon-based solutions); they can etch and permanently damage the marble.

Blot and Remove Excess

• Initial Blotting: If the stain is fresh, gently blot the area with a soft, damp cloth to absorb as much of the curry as possible. Avoid rubbing, as this can spread the stain or push it deeper into the stone.
• Pat Dry: After blotting, use a clean towel to gently pat the area dry. Keeping moisture on marble longer than necessary can worsen the stain.

Prepare a Gentle Cleaning Solution

• Create a pH-neutral Solution: Mix warm water with a few drops of a mild, pH-neutral dish detergent. “pH-neutral” means the cleaner won’t be too acidic or basic, reducing the risk of etching the marble.
• Test First: Always test your cleaning solution on an inconspicuous spot to ensure it won’t discolor or damage your countertop.

Application Process

• Gently Apply the Solution: Moisten a soft microfiber cloth with the cleaning solution and gently dab at the stain. Work from the outside edge of the stain toward the center to prevent spreading.
• Let It Sit Briefly: For tougher stains, allow the solution to rest on the spot for 5–10 minutes. Do not let it dry completely; keep an eye on the area to ensure the solution remains moist.

Wipe and Rinse

• Remove the Cleaner: Use another soft, damp cloth (with only clean water) to wipe away the cleaning solution, ensuring no residue is left behind that could attract dirt or cause further staining.
• Dry the Surface: Buff the countertop dry with a soft towel. Proper drying is essential to avoid water spots and to keep your marble in top shape.

Dealing With Persistent Stains

• Repeat as Needed: Sometimes a second or even third gentle cleaning may be necessary. Patience and gentle repetition help lift stubborn stains without harming the marble.
• Use a Poultice (Optional): If the stain continues to linger, consider applying a poultice. Mix baking soda with a small amount of water to form a thick paste, spread it over the stain, cover with plastic wrap, and let it sit for about 24 hours. Afterward, gently wipe off the residue and rinse the area thoroughly. Always test the poultice on a small area first to ensure it does not affect the finish.

Final Thoughts

• Maintenance Is Key: Regular cleaning with a damp microfiber cloth and a pH-neutral cleaner will help prevent stains from setting in. Quick action on spills, especially oily or curry-based ones, goes a long way.
• Protect Your Countertop: Consider using coasters, trivets, or mats in areas prone to spills. Preventative steps are the best defense against future stains on your marble surface.