Approach Overview

• Identify the challenge: Price tag stickers often use a paper or plastic backing with an adhesive that can be stubborn on finished wood. The trick is to remove the sticker and adhesive without harming the dresser’s finish.
• Use gentle, heat-based methods first: A hairdryer can soften the adhesive, making removal easier while minimizing risk to the wood.
• Test before application: Always try the method on a hidden spot to ensure that neither the wood nor its finish gets damaged.

Step-by-Step Instructions

• Soften the adhesive:
  • Warm up the sticker using a hairdryer set at a low heat setting. Hold the dryer a few inches away and direct warm air onto the sticker for about 20-30 seconds. This process helps in loosening the adhesive without causing harm to the wood’s finish.
• Peel off the sticker:
  • Once the adhesive softens, gently lift the corner of the sticker with your fingernail or a soft, non-abrasive tool. Slowly peel it away from the wood, ensuring you don’t rip the finish.
• Eliminate the remaining adhesive:
  • Dampen a corner of an E-Cloth slightly with water. Gently rub the sticky residue off using small circular motions. The water helps to break down the adhesive while the microfiber material of the cloth lifts it off without scratching the wood.
• Clean and dry the area:
  • After removing the adhesive, wipe the area with a dry, clean cloth to absorb any excess moisture. This step is essential for maintaining the integrity of the wood's finish.

Additional Tips

• Take your time: Rushing can lead to scratches or damage. If the adhesive remains, repeat the heating process rather than forcing the sticker off.
• Avoid harsh chemicals: Stick to water or a gentle solution approved for wooden surfaces. Overly chemical products could react with the finish.
• Regular maintenance: Once your dresser is sticker-free, consider routine cleaning with water and an E-Cloth to keep the finish looking its best.