How to Clean Your Entire Home With Just Three E-Cloth Products

How to Clean Your Entire Home With Just Three E-Cloth Products

How to Clean Your Entire Home With Just Three E-Cloth Products

How to Clean Your Entire Home With Just Three E-Cloth Products

Hint: E-Cloth is Enough

E-Cloth started with just two cloths: The General Purpose Cloth and the Glass & Polishing Cloth. This dynamic duo can clean nearly any surface in your home. And for most hard flooring, the Deep Clean Mop cleans and shines.

General Purpose Cloth

The General Purpose Cloth is our “one-size-fits-all” cleaning cloth, and its results are anything but ordinary.

This cloth can be used be remove 99 percent of bacteria from nearly any hard surface in your home – including, but not limited to, kitchen appliances, sinks, countertops, wooden desks, coffee tables, bathtubs – the list goes on and on. It’s even great on vehicle interior and exterior surfaces.

To use the General Purpose Cloth, follow these simple steps:

1. Dampen the cloth under warm or hot running water, then gently wring out so the cloth remains damp, but not dripping
2. Fold the cloth twice (or more) so it creates a pad-like surface, allowing you to use multiple areas of the cloth efficiently before it becomes too soiled
3. Draw the cloth along the dirty surfaces you need cleaned, wiping in either circular motions or from edge to edge (Keep in mind that extra-dirty surfaces may require extra elbow grease or a more wet cloth)
4. Rinse the cloth once it becomes too soiled, and watch as all the grime is flushed down the drain
5. Repeat the process if you have more areas to clean
6. Rinse the cloth one final time to thoroughly remove all noticeable gunk and grime
7. Hang the cloth to fully air dry before folding and storing for its next use

General Purpose Cloth

The General Purpose Cloth is our “one-size-fits-all” cleaning cloth, and its results are anything but ordinary.

This cloth can be used be remove 99 percent of bacteria from nearly any hard surface in your home – including, but not limited to, kitchen appliances, sinks, countertops, wooden desks, coffee tables, bathtubs – the list goes on and on. It’s even great on vehicle interior and exterior surfaces.

To use the General Purpose Cloth, follow these simple steps:

1. Dampen the cloth under warm or hot running water, then gently wring out so the cloth remains damp, but not dripping
2. Fold the cloth twice (or more) so it creates a pad-like surface, allowing you to use multiple areas of the cloth efficiently before it becomes too soiled
3. Draw the cloth along the dirty surfaces you need cleaned, wiping in either circular motions or from edge to edge (Keep in mind that extra-dirty surfaces may require extra elbow grease or a more wet cloth)
4. Rinse the cloth once it becomes too soiled, and watch as all the grime is flushed down the drain
5. Repeat the process if you have more areas to clean
6. Rinse the cloth one final time to thoroughly remove all noticeable gunk and grime
7. Hang the cloth to fully air dry before folding and storing for its next use

Glass & Polishing Cloth

The Glass & Polishing Cloth is our secret to a streak-free finish! It’s most commonly used after cleaning with another cloth, like our General Purpose Cloth.

This smooth, rectangular cloth removes leftover water residue and, well, polishes and shines the surface.

To use the Glass & Polishing Cloth, follow these simple steps:

1. Clean with the General Purpose Cloth, then immediately grab the Glass & Polishing Cloth
2. Fold the Glass & Polishing Cloth at least a couple times to create a pad-like surface – again, this is to ensure you’ll have multiple dry areas of the cloth to work with
3. Wipe the cloth in one long, straight motion from the top of the newly cleaned surface down to the bottom (or from side to side; the cloth isn’t picky)
4. Turn over and/or refold the cloth once one section of it becomes too wet to use effectively; you’ll find that it soaks up water residue most effectively when the cloth itself is clean and dry
5. Rinse the cloth to remove any “sneaky” dirt, lint, or other particles that have collected onto the cloth
6. Hang the cloth to fully air dry before folding and storing for its next use

Glass & Polishing Cloth

The Glass & Polishing Cloth is our secret to a streak-free finish! It’s most commonly used after cleaning with another cloth, like our General Purpose Cloth.

This smooth, rectangular cloth removes leftover water residue and, well, polishes and shines the surface.

To use the Glass & Polishing Cloth, follow these simple steps:

1. Clean with the General Purpose Cloth, then immediately grab the Glass & Polishing Cloth
2. Fold the Glass & Polishing Cloth at least a couple times to create a pad-like surface – again, this is to ensure you’ll have multiple dry areas of the cloth to work with
3. Wipe the cloth in one long, straight motion from the top of the newly cleaned surface down to the bottom (or from side to side; the cloth isn’t picky)
4. Turn over and/or refold the cloth once one section of it becomes too wet to use effectively; you’ll find that it soaks up water residue most effectively when the cloth itself is clean and dry
5. Rinse the cloth to remove any “sneaky” dirt, lint, or other particles that have collected onto the cloth
6. Hang the cloth to fully air dry before folding and storing for its next use

Deep Clean Mop

The Deep Clean Mop will leave you floored. This full-size wet mop can clean even the dingiest floors and will leave them sparkling like never before. It’s the ideal mop for laminate, hardwood, vinyl, linoleum, and more!

The Deep Clean Mop removes 99 percent of bacteria – using just water – and comes with one reusable mop head.

To use the Deep Clean Mop, follow these simple steps:

1. Adjust the handle to a comfortable length; hold the bottom of the handle near the mop base and twist the blue section of the handle while pulling outwards (up from the mop base)
2. Remove the mop head from the mop base and run the microfiber head under warm or hot running water, then gently wring it out and reattach to the mop base
3. Reattach the mop head by placing it on the floor, blue side down, and centering the mop base on top of the mop head
4. Wipe in an ‘S’ pattern on your floor while moving backwards out of the room or space; make sure to get into corners and under appliances and furniture
5. Rinse and repeat once the mop head becomes too soiled to pick up more dirt
6. Wash the mop head after you’re done mopping to ensure it’ll be ready for your next cleaning session

Deep Clean Mop

The Deep Clean Mop will leave you floored. This full-size wet mop can clean even the dingiest floors and will leave them sparkling like never before. It’s the ideal mop for laminate, hardwood, vinyl, linoleum, and more!

The Deep Clean Mop removes 99 percent of bacteria – using just water – and comes with one reusable mop head.

To use the Deep Clean Mop, follow these simple steps:

1. Adjust the handle to a comfortable length; hold the bottom of the handle near the mop base and twist the blue section of the handle while pulling outwards (up from the mop base)
2. Remove the mop head from the mop base and run the microfiber head under warm or hot running water, then gently wring it out and reattach to the mop base
3. Reattach the mop head by placing it on the floor, blue side down, and centering the mop base on top of the mop head
4. Wipe in an ‘S’ pattern on your floor while moving backwards out of the room or space; make sure to get into corners and under appliances and furniture
5. Rinse and repeat once the mop head becomes too soiled to pick up more dirt
6. Wash the mop head after you’re done mopping to ensure it’ll be ready for your next cleaning session

Shop this story

Shop this story

Shop this story